Mounting/insulation board Thermo Board
EBECO THERMO BOARD 3,6m2
EBECO
With registration you can access the Würth Elektro online shop selection.
Thermo Board is an energy-efficient insulation board for underfloor heating, primarily intended for use with Thermoflex Kit or in wet rooms with wooden floors. The board is made of extruded polystyrene with a fibreglass-reinforced surface layer and has a high insulation capacity. Thermo Board is flexible and can be laid on all sub-floorings. It is easy to cut and adapt to the space. In addition, it is not affected by moisture or water.
Datasheets(X)
Thermal insulation | Yes |
Acoustic insulation | Yes |
Suitable for pitched roof | No |
Suitable for flat roof | No |
Suitable for wall | No |
Suitable for facade | No |
Suitable for ceiling | No |
Suitable for floor | Yes |
Suitable for underground installation | No |
Suitable for duct mounting | No |
Material | Extruded polystyrene (XPS) |
Model | Plate |
Suitable for tube mounting | No |
Upholstery front/top vapor-tight | No |
Material upholstery front/top | Other |
Halogen free | Yes |
Upholstery rear/bottom damp proof | No |
Material upholstery rear/bottom | None |
With nail flange (reinforced fixation strip) | No |
With decorative finish | No |
Length | 1200 mm |
Width | 600 mm |
Thickness | 10 mm |
With fall | No |
Fall | 0 mm/m |
Edge finish | Straight |
Heat resistance Rd | 0.3 (m².K)/W |
Density | 1736 kg/m³ |
Operating temperature | 75-75 °C |
With angle fillet | No |
Self-adhesive | No |
Euro fire class according to EN 13501-1 | F |
Max. moist absorption | 0 kg/m² |
Compressive strength short-term load | 300 kN/m² |
Compressive strength long-term load | 140 kN/m² |