Defrosting cable F-10 Ebeco

Name: Defrosting cable F-10 Ebeco
Brand: EBECO
SKU: WS0436702M

HEATING CABLE EBECO F-10 10W/M
EBECO

Art.-no. WS0436702M

EAN 7330778604609

All versions

Similar products

Defrosting cable F-10 Ebeco

Art.-no. WS0436702M

Quantity

x 1

Show availability at another Center

Exclusively for trade customers

With registration you can access the Würth Elektro online shop selection.

Locate Center shop
Login/Register
Call customer service: 010 308 4700

Your feedback for this product

F-10 is a smart self-adjusting heater cable that is sensitive to the ambient temperature. The heater cable adjusts itself allowing you to enjoy even heat distribution and monitored energy consumption at all times.

Because the cable is self-adjusting, you can cut it and fit it around a pipe without the risk of overheating. No cold lead is needed. In most cases, you will not need a thermostat. If the cable is long and installed inside the pipe, we recommend using a thermostat. We recommend using a residual-current circuit breaker with all heater cable structures.

You can install F-10 inside and outside water pipes and drainpipes. The product does not contain PVC, allowing safe installation inside a drinking water pipe.

F-10 was designed to stand Nordic winter conditions. How it works:

Inside; 32 mm uninsulated plastic pipe up to –30°C.

Outside; 32 mm plastic or metal pipe, 20 mm insulation, –20°C.

Folding or twisting the cable enhances its defrosting capacity.

Product information

Würth Elektronik Oy Catalogue

Datasheets(X)

Certificates/ Documents

Cable type	Self-limiting parallel
Max. hold temperature	65 °C
Heating capacity	10 W/m
Screening	Copper sheath
Nominal voltage	230 V
Diameter	0 mm
Height	4.6 mm
Width	7 mm
Length	300 m
Colour	Blue
Application	Pipe heating
E-number Finland	0436702
Brand	EBECO

Additional accessory:

Product

Description

Quantity

Price
/PU

Frost protection thermostat Frostvakt Control

THERMOSTAT FROSTVAKT CONTROL

EBECO

Art.-no. WS2615606

x 1

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).