Defrosting cable Snow melt
HEATING MAT EBECO SNOW MELT 4250W
With registration you can access the Würth Elektro online shop selection.
Ebeco snow melt heater cable mats for defrosting. Elastic band fastening. Installed on a sand bed underneath asphalt or stone pavement.
Cord length 5 m. Power 300 W/m2, voltage 230 V.
Datasheets(X)
With support mat | Yes |
Fixation thermal conductor | Other |
Self-adhesive | No |
Connection voltage | 230-230 V |
Connected load | 4250-4250 W |
Power | 250 W/m² |
Heating conductor load | 27 W/m |
Resistance | 12 Ohm |
Number of cold conductors | 2 |
Length of cold conductors | 5000 mm |
Suitable for damp space | Yes |
Suitable as outdoor surface heating | Yes |
Suitable as roof surface heating | No |
Surface | 17 m² |
Length | 21500 mm |
Width | 1000 mm |
Thickness | 7 mm |
With controller | No |
With room temperature controller | No |
With floor temperature sensor | No |
E-number Finland | 8176214 |
Last viewed
“Varattu” text indicator light with red lens IP20 Exxact
Lighting rail X-component XA3, Unipro
Spotlight Tracklight Spot Zoom Dim
Lighting rail T-component CTA3D, Unipro
Knurled nut, high model
Wall bracket VKF hot dip galvanised, Meka
Centre plate solid 100mm Jussi
Hexagon screw, countersunk head
Timer AT ELKO RS Nordic
Handle-type fuse Mersen