Heater mat Thermoflex 120
HEATING MAT THERMOFLEX 120W/m2 200W
With registration you can access the Würth Elektro online shop selection.
Floor heating with an adhesive mat – simply unroll the mat and you are ready to go. Ideal on open, even surfaces with few obstacles. The heater is already attached to the mat. You have to just unroll it and attach it to the floor. The mat is easy to cut into smaller pieces and fixed on the surface of your choice. Thin heater cable, only 4 mm
Datasheets(X)
With support mat | Yes |
Fixation thermal conductor | Other |
Self-adhesive | Yes |
Connection voltage | 230-230 V |
Connected load | 200-200 W |
Power | 120 W/m² |
Heating conductor load | 11 W/m |
Resistance | 264 Ohm |
Number of cold conductors | 1 |
Length of cold conductors | 2500 mm |
Suitable for damp space | Yes |
Suitable as outdoor surface heating | No |
Suitable as roof surface heating | No |
Surface | 1.7 m² |
Length | 2500 mm |
Width | 500 mm |
Thickness | 4 mm |
With controller | No |
With room temperature controller | No |
With floor temperature sensor | No |
E-number Finland | 8176562 |
Last viewed
Slotted screw raised countersunk head DIN 966
Slotted screw countersunk head ISO 14581
Cable trunk adhesive tape mounting Ultra mini strip Exxact
ecosyn®-plast
Floodlight IP 65 Floodlight Compact Sensor
WÜPOFAST®, blue passivated Chipboard screw
Weld stud ISO 13918 PT
Hexagon screw, full thread
Cylindrical pin, hardened
Feedthrough connector 2.5–50 mm2 KE61