Heater mat Thermoflex Kit 500
HEATING MAT THERMOFLEX KIT 500 1480W
With registration you can access the Würth Elektro online shop selection.
Thermoflex Kit 500 includes a heater cable and an adhesive mat, which is easy to unroll. Wi-Fi-ready EB-Therm 500 thermostat included. Combine the product with EB-Connect Wi-Fi to control your floor heating system through the Ebeco Connect application or an open API interface.
Datasheets(X)
With support mat | Yes |
Fixation thermal conductor | Other |
Self-adhesive | Yes |
Connection voltage | 230-230 V |
Connected load | 1480-1480 W |
Power | 160 W/m² |
Resistance | 36 Ohm |
Number of cold conductors | 1 |
Length of cold conductors | 2500 mm |
Suitable for damp space | Yes |
Suitable as outdoor surface heating | No |
Suitable as roof surface heating | No |
Surface | 9.3 m² |
Length | 18600 mm |
Width | 4 mm |
Thickness | 4 mm |
With controller | Yes |
With room temperature controller | Yes |
With floor temperature sensor | Yes |
E-number Finland | 8176811 |
Last viewed
Cable tie lockable natural TRLWS 2A
Crimp sleeve WEBSO4
Wall mounting set Cubo O/C
Mounting plate KL zinc plated, Meka
Shoulder screw, flat cylinder head, slotted
Set screw, hex socket, cone point
Ceiling bracket CB3, Unipro
Wall bracket VK hot dip galvanised, Meka
Press-in pin WETP
Wire marker roll 0.75 to 4.0 mm2 Helagrip HGDC