Heater mat Thermoflex Kit 500
HEATING MAT THERMOFLEX KIT 500 1700W
With registration you can access the Würth Elektro online shop selection.
Thermoflex Kit 500 includes a heater cable and an adhesive mat, which is easy to unroll. Wi-Fi-ready EB-Therm 500 thermostat included. Combine the product with EB-Connect Wi-Fi to control your floor heating system through the Ebeco Connect application or an open API interface.
Datasheets(X)
With support mat | Yes |
Fixation thermal conductor | Other |
Self-adhesive | Yes |
Connection voltage | 230-230 V |
Connected load | 1700-1700 W |
Power | 120 W/m² |
Heating conductor load | 11 W/m |
Resistance | 31 Ohm |
Number of cold conductors | 1 |
Length of cold conductors | 2500 mm |
Suitable for damp space | Yes |
Suitable as outdoor surface heating | No |
Suitable as roof surface heating | No |
Surface | 14 m² |
Length | 28000 mm |
Width | 4 mm |
Thickness | 4 mm |
With controller | Yes |
With room temperature controller | Yes |
With floor temperature sensor | Yes |
E-number Finland | 8176225 |
Last viewed
Slotted screw pan head DIN 7985
Corner component Instal
Hexagon socket screw, flat cylinder head
Residual current device outlet, flush IP44, Kosti
Damp proof industrial luminaire Damp Proof Classic Emergency, IP65
Signal cable LIYCY
Nail clamp SC black
Wall mounting set Cubo O/C
Pre-wired connector LS AY CP COB
Terminal block 2210 series with push-button 3 conductor TOPJOB® S