Defrosting cable Snow melt
HEATING MAT EBECO SNOW MELT 2700W
Art.-no. WS8176209
EAN 7330778602926
With registration you can access the Würth Elektro online shop selection.
Ebeco snow melt heater cable mats for defrosting. Elastic band fastening. Installed on a sand bed underneath asphalt or stone pavement.
Cord length 5 m. Power 300 W/m2, voltage 230 V.
Datasheets(X)
With support mat | Yes |
Fixation thermal conductor | Other |
Self-adhesive | No |
Connection voltage | 230-230 V |
Connected load | 2700-2700 W |
Power | 250 W/m² |
Heating conductor load | 27 W/m |
Resistance | 20 Ohm |
Number of cold conductors | 2 |
Length of cold conductors | 5000 mm |
Suitable for damp space | Yes |
Suitable as outdoor surface heating | Yes |
Suitable as roof surface heating | No |
Surface | 11 m² |
Length | 11000 mm |
Width | 1000 mm |
Thickness | 7 mm |
With controller | No |
With room temperature controller | No |
With floor temperature sensor | No |
E-number Finland | 8176209 |
Last viewed
Cable routing conduit cover Thorsman
Main switch DX3
Hexagon socket screw, cylinder head
Residual current circuit breaker DX3 30mA
Wing repair washer, fender washer, round hole, primarily for wood substrates
Nail clamp Tillex C white
Hexagon socket screw, cylinder head
Neutral bar N and PE bars with 16 mm2 pillar terminals, Ensto
Busbar ABB
Limit switch cable feed through OsiSense