Impulse relay Set 12
IMPACT RELAY SER. 12-2NC 16A 250VAC
Art.-no. WS2701815
EAN 4010312108048
With registration you can access the Würth Elektro online shop selection.
Electronic impulse relay suitable for DIN rail mounting.
- No standby loss
- Noiseless switching – near noiseless operation
- No constant power supply is required – energy efficient operation
- State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays
- By using a bistable relay coil power loss and heating is avoided even in the on mode.
- The relay contact can be open or closed when put into operation. It will be synchronized upon first use.
Datasheets(X)
Function | Electronic switch |
Mounting method | DIN rail |
Width in number of modular spacings | 1 |
Built-in depth | 58 mm |
Number of contacts as normally open contact | 2 |
Number of contacts as normally closed contact | 0 |
Number of contacts as change-over contact | 0 |
Control voltage 1 | 8-230 V |
Type of control voltage 1 | AC/DC |
Frequency control voltage 1 | 50-50 Hz |
Control voltage 2 | 230-230 V |
Type of control voltage 2 | AC |
Frequency control voltage 2 | 50-50 Hz |
Rated switch current | 16 A |
Max. incandescent lamp load | 2000 W |
Max. load fluorescent lamp | 1000 VA |
Max. load fluorescent lamp (Duo circuit) | 1000 VA |
Max. load fluorescent lamp (parallel compensated) | 500 VA |
Max. switching current (cos phi = 0.6) | 4 A |
Suitable for manual operation | No |
E-number Finland | 2701815 |
