Mounting/insulation board Ebisol
INSULATION PLATE EBECO CABLE BOARD 3,6m
EBECO
With registration you can access the Würth Elektro online shop selection.
Cable Board is an insulating board made of extruded polystyrene plastic, specially designed for Cable Kit with milled grooves, c/c 10 cm. The special structure of the board reflects heat upwards in an extremely effective way. Energy consumption is up to 45% lower when compared to a reference installation without insulation. The holes in the board let moisture through if necessary. The board is light and durable and the grooves make it easy to place the cable at exactly the right distance.
Datasheets(X)
Thermal insulation | Yes |
Acoustic insulation | Yes |
Suitable for pitched roof | No |
Suitable for flat roof | No |
Suitable for wall | No |
Suitable for facade | No |
Suitable for ceiling | No |
Suitable for floor | Yes |
Suitable for underground installation | No |
Suitable for duct mounting | No |
Material | Extruded polystyrene (XPS) |
Model | Plate |
Suitable for tube mounting | No |
Upholstery front/top vapor-tight | No |
Material upholstery front/top | None |
Halogen free | Yes |
Upholstery rear/bottom damp proof | No |
Material upholstery rear/bottom | None |
With nail flange (reinforced fixation strip) | No |
With decorative finish | No |
Length | 1200 mm |
Width | 600 mm |
Thickness | 20 mm |
With fall | No |
Fall | 0 mm/m |
Edge finish | Recessed edge |
Heat resistance Rd | 0.6 (m².K)/W |
Density | 132 kg/m³ |
Operating temperature | 75-75 °C |
With angle fillet | No |
Self-adhesive | No |
Euro fire class according to EN 13501-1 | F |
Max. moist absorption | 0 kg/m² |
Compressive strength short-term load | 200 kN/m² |
Compressive strength long-term load | 90 kN/m² |
E-number Finland | 8179893 |
Brand | EBECO |