Mounting/insulation plate Ebisol
INSULATION PLATE EBISOL 3MM 6m2 10PCS
EBECO
With registration you can access the Würth Elektro online shop selection.
The most efficient insulating materials on the market. Can be used with or without a floor heating system. Thanks to its special cell structure, the insulation plate does not conduct heat. Instead, it reflects it back against the floor surface. This is an energy-efficient solution. The Ebeco Foil Kit floor heating system is always used with Ebisol. Ebisol offers many substantial benefits even if you do not have a floor heating system. It is not installed very high (only 3 or 6 mm). It is effective against moisture and cold, repels water and will not rot or turn musty. In addition, it deadens the sound of footsteps and bumping noises, making the floor more quiet and comfortable. Please remember to remove the old plastic membrane before installing Ebisol.
Datasheets(X)
Thermal insulation | Yes |
Acoustic insulation | Yes |
Suitable for pitched roof | No |
Suitable for flat roof | No |
Suitable for wall | No |
Suitable for facade | No |
Suitable for ceiling | No |
Suitable for floor | Yes |
Suitable for underground installation | No |
Suitable for duct mounting | No |
Material | Extruded polystyrene (XPS) |
Model | Plate |
Suitable for tube mounting | No |
Upholstery front/top vapor-tight | No |
Material upholstery front/top | None |
Halogen free | Yes |
Upholstery rear/bottom damp proof | No |
Material upholstery rear/bottom | None |
With nail flange (reinforced fixation strip) | No |
With decorative finish | No |
Length | 1200 mm |
Width | 500 mm |
Thickness | 3 mm |
With fall | No |
Fall | 0 mm/m |
Edge finish | Straight |
Heat resistance Rd | 0.1 (m².K)/W |
Density | 444 kg/m³ |
Operating temperature | 70-70 °C |
With angle fillet | No |
Self-adhesive | No |
Euro fire class according to EN 13501-1 | F |
Max. moist absorption | 0 kg/m² |
Compressive strength long-term load | 60 kN/m² |