Residual current circuit breaker CDA with AutoTest function
RCCB CDA440RA 30MA A/4X40A AUTOT 7M
HAGER
With registration you can access the Würth Elektro online shop selection.
Type A residual current circuit breakers with AutoTest function are designed for applications where it is not possible or desirable to disconnect the power supply during a device function test. The automatic test function ensures the regular operation of the residual current device without interruption.
The AutoTest function improves operational safety and reduces maintenance and personnel costs, especially in applications where there are many residual current devices or they are located in difficult to reach places. The solution is particularly suitable for protecting the power supply of critical systems.
Typical applications include shopping malls, hospitals, rail and rubber-wheeled transport systems, telecom and communication systems, signage and other applications where continuity of power supply is essential.
Datasheets(X)
Number of poles | 4 |
Rated voltage | 230 V |
Rated current | 40 A |
Rated fault current | 30 A |
Rated insulation voltage Ui | 2500 V |
Rated impulse withstand voltage Uimp | 4 kV |
Mounting method | DIN rail |
Leakage current type | A |
Short-circuit breaking capacity (Icw) | 10000 kA |
Surge current capacity | 4 kA |
Frequency | 50 Hz |
Degree of protection (IP) | IP20 |
Width in number of modular spacings | 7 |
Ambient temperature during operating | -25-35 °C |
Connectable conductor cross section multi-wired | 1.5-35 mm² |
Connectable conductor cross section solid-core | 1.5-35 mm² |
E-number Finland | 3246535 |
Brand | HAGER |
Last viewed
WIRE MARKER BAG 1.5-4.0 MM2 Closed
Light throttle flush mounted, Jussi
Hexagon socket screw, flat round head
Lighting rail cover CS3, Unipro
Hexagon screw, partial thread
Serrated lock washer pair Wide model
Type F plug female
Ceramic tubular fuse Mersen
Plastofast, pan head
Slotted cable trunking ECS