Mirror defogger Ebeco Clear Mirror
SPECIAL HEATER CLEAR MIRROR 28W
With registration you can access the Würth Elektro online shop selection.
Ebeco Clear Mirror allows you to take a look at yourself right after a shower. The solution is simple. A self-adhesive film is attached on the back of the mirror and connected to a bathroom lamp. The defogger is activated when the lamp is switched on.
Datasheets(X)
With support mat | No |
Fixation thermal conductor | Other |
Self-adhesive | Yes |
Connection voltage | 230-230 V |
Connected load | 28-28 W |
Power | 175 W/m² |
Resistance | 1889 Ohm |
Number of cold conductors | 1 |
Length of cold conductors | 2000 mm |
Suitable for damp space | Yes |
Suitable as outdoor surface heating | No |
Suitable as roof surface heating | No |
Surface | 0.16 m² |
Length | 274 mm |
Width | 574 mm |
Thickness | 0.3 mm |
With controller | No |
With room temperature controller | No |
With floor temperature sensor | No |
E-number Finland | 8172648 |
