Floor heater cable Cable Kit 200
SUPPLEMENT CABLE KIT 200 107M 1180W
With registration you can access the Würth Elektro online shop selection.
Ebeco Cable Kit 200 is a floor heating kit for clinker and natural stone floors. Thin 10 W/m heater cable, only 4 mm. Approved for use against flammable materials, e.g. chipboard. The set includes a cable, coil holder, EB-Therm 205 thermostat with temperature drop, and flexible plastic tube for 2.5 m sensor cable. Cold lead length 3 m. Use glue to attach the cable and spread a filler layer of 4 mm over it. Combine with the Cable Board insulation plate to build an energy-efficient concrete floor heating system. Can be installed between floor joists.
Datasheets(X)
Cable type | Dual core |
Max. hold temperature | 90 °C |
Heating capacity | 11 W/m |
Screening | Braiding |
Nominal voltage | 230 V |
Diameter | 4 mm |
Height | 4 mm |
Width | 4 mm |
Length | 107 m |
Colour | Other |
Application | Other |
E-number Finland | 8176490 |
Last viewed
Connector SSA hot dip galvanised, Meka
Circuit breaker
EMC LOCKNUT MS PG EMC, brass nickel plated
Cover plate 87 mm Solid Exxact
Terminal block 2202 series with push-button 2 conductor TOPJOB® S
Taptite DIN 7500-C, cylinder head, TX, thread-rolling screw
"EMERGENCY STOP" button/indicator plate Harmony
Push-button with LED indicator, flush Exxact
ENLARGER PA M/M Polyamide
Circuit board support TRMDLSP3