Defrosting cable Snow melt
HEATING MAT EBECO SNOW MELT 3600W
With registration you can access the Würth Elektro online shop selection.
Ebeco snow melt heater cable mats for defrosting. Elastic band fastening. Installed on a sand bed underneath asphalt or stone pavement.
Cord length 5 m. Power 300 W/m2, voltage 230 V.
Datasheets(X)
With support mat | Yes |
Fixation thermal conductor | Other |
Self-adhesive | No |
Connection voltage | 230-230 V |
Connected load | 3600-3600 W |
Power | 250 W/m² |
Heating conductor load | 27 W/m |
Resistance | 15 Ohm |
Number of cold conductors | 2 |
Length of cold conductors | 5000 mm |
Suitable for damp space | Yes |
Suitable as outdoor surface heating | Yes |
Suitable as roof surface heating | No |
Surface | 14.5 m² |
Length | 14500 mm |
Width | 1000 mm |
Thickness | 7 mm |
With controller | No |
With room temperature controller | No |
With floor temperature sensor | No |
E-number Finland | 8176212 |
Last viewed
Terminal block 2202 series with push-button GNYE 4 conductor TOPJOB® S
Outlet 709-581
Hexagon socket screw, flat cylinder head
Fire retardant double junction box Multifix KR24
Dimmer switch NOCTURNE
RUBBER SEAL PG Enclosed
Hexagon screw, full thread
Wave washer Type A
Taptite DIN 7500-C, cylinder head, TX, thread-rolling screw
Hexagon socket screw, cylinder head